Enamo Grip Applications
- Airless or pot sprayed: tip size .015 – .019; apply in two coats
- Roller: use 1/4″ nap commercial roller; apply in two coats using an added bubble breaker in formula
- Brush: use soft bristle brush; apply in two coats
- Add an additional coat for vertical surfaces
Applied rate:
- Metal: 250 sq. ft./gal. (23 sq.m./gal.)
- Concrete or wood: 200 sq. ft./gal. (18.5 sq.m./gal.)
Film thickness:
- Wet: Metal – 6.5 mils (165 microns)
Concrete – 8 mils (200 microns) - Dry: Metal – 3 mils (76 microns)
Concrete – 4 mils (100 microns)
Temperature:
- 50° F (10° C) – 100° F (38° C)
- Colder temperatures will increase dry time
Dry times:
- 1 hour to touch
- 4 hours to handle
- 2 hours to recoat
Full cure:
- 4-5 days in warm temps
- 7-10 days in cool temps
Precautions:
- 4 hour pot life at 70° F
- 1 hour pot life at 90° F
- Strong odor during application and initial curing
Limitations:
- Not intended for use on food preparation surfaces that are in direct contact with food
- Do not apply over wet or moist surfaces.
- Surfaces must be clean and dry
- 6 to 8 hour pot life in normal ambient temperatures. 1 to 1.5 hour pot life in temperatures above 85 degrees F